Back to Blog
Tips & Care 2026-11-16 Wokeface 6 views

Rainbow Maker Care: Display Your Sun Catcher Decal Right

Rainbow Maker Care: Display Your Sun Catcher Decal Right

Learn how to place, reposition, and care for Wokeface rainbow maker sun catcher decals so the print stays intact and the rainbows keep showing up.

Start with the right window and the right side of the glass

Wokeface rainbow maker sun catcher decals are made of a specialized light refracting vinyl. When sunlight shines through them, vivid rainbows appear. The supplied instructions are simple: place the decal on the inside of a window and enjoy the rainbows.

The catalog notes that these decals are most recommended for glass surfaces, so a clean interior window pane is the best starting point. Before you peel anything, check that the spot gets direct sun during the day. The decal needs light passing through it to create the effect, so a shaded window will not deliver the same result.

What the catalog confirms about each design

  • Heart Eye Rainbow Maker: Heart Eye Rainbow Maker is a 3.75x3.4 inch light refracting vinyl decal. The compact size fits smaller panes or tight spots where a larger decal would crowd the glass.
    Heart Eye Rainbow Maker
    Heart Eye Rainbow Maker
  • Sunshine Rainbow Maker: Sunshine Rainbow Maker is a 4 inch light refracting vinyl decal. At 4 inches, it is the largest of the three listed designs, so give it a little more clear space.
    Sunshine Rainbow Maker
    Sunshine Rainbow Maker
  • Sun Moon Rainbow Maker: Sun Moon Rainbow Maker is a 3.75 inch light refracting vinyl decal. A 3.75 inch decal leaves room to pair with other small window decor without overlap.

A simple placement routine that protects the print

  1. Pick a sunny interior window: Choose a glass surface that receives direct sunlight, since the decal works by refracting light through the vinyl. The catalog recommends glass surfaces most of all.
  2. Clean the glass first: Wipe the inside of the window so the decal can sit flat. The supplied information does not specify a cleaner, so use your usual glass-cleaning routine and let the surface dry.
  3. Place it on the inside of the window: The instructions say to place the decal on the inside of the window. Press it gently onto the glass rather than stretching or bending the vinyl.
  4. Leave it alone once it is set: The printed design ink can degrade or flake if you bend the vinyl when repositioning, especially if it has been on the window for a long time. The fewer moves, the better.

Repositioning is possible, but handle the vinyl with care

The catalog states that the decal removes without residue and can be repositioned carefully. That is useful if you want to try a different window or adjust the height after you see the rainbow angle. The key word is carefully: peel slowly, keep the vinyl flat, and avoid folding or creasing it as you move it.

The disclaimer is specific: the printed design ink can degrade or flake if you bend the vinyl when repositioning, especially if it has been on the window for a long time. The catalog also notes that this is not considered a defect and that decals with this issue are not replaced. Treat repositioning as a one-time adjustment rather than a regular habit.

Choosing between the three designs

All three rainbow makers use the same light refracting vinyl and the same inside-window placement. The difference is the design and the size. Heart Eye Rainbow Maker and Sun Moon Rainbow Maker are both 3.75 inches in their listed dimensions, while Sunshine Rainbow Maker is 4 inches. If you are working with a narrow pane or want to leave room for other window decor, the smaller two give you more flexibility. If you want the design to be the main feature on a larger window, the 4 inch Sunshine Rainbow Maker takes up a little more space.

The catalog does not list different light behavior or rainbow intensity for each design, so pick the one whose look you prefer rather than expecting a different effect.

Care habits that keep the decal looking its best

Once the decal is on the glass, leave it in place. The main risk described in the catalog is bending the vinyl during repositioning, not everyday window use. When you clean the window, work around the decal rather than scrubbing over it, and avoid pulling at the edges. The supplied information does not include a specific cleaning product or method for the decal itself, so keep it simple and avoid anything that would require you to peel it off.

If you notice the print starting to flake after a reposition, the catalog notes that this is not considered a defect and is not replaced. That makes careful placement the best form of care.

What to check before you stick

  • Is the window glass?: The catalog says the decal is most recommended for glass surfaces. Other surfaces are not confirmed in the supplied information.
  • Does the spot get direct sun?: Rainbows appear when sunlight shines through the vinyl, so a sunny window is the practical requirement.
  • Have you settled on the position?: Because repositioning can damage the print, decide on the spot before you press the decal down.
  • Is the size right for the pane?: Check the listed dimensions against your window so the decal fits without overlapping trim or other decor.

Related Articles

Customer Service
Home
Products
Cart
Profile